For screen reader problems with this website, please call406-265-55684 0 6 2 6 5 5 5 6 8Standard carrier rates apply to texts.

Northern Home Essentials

Northern Home Essentials

406-265-5568

Sennheiser SL DI 4 XLR Danter Preamplifier

Model #: SL DI 4 XLR

At a Glance

Sennheiser SL DI 4 XLR Danter Preamplifier with switchable phantom power and software controlled

WarningProposition 65 Warning for California Residents
Sennheiser SL DI 4 XLR Danter Preamplifier

Connections

Connector Type4x XLR3F; 2 x RJ 45; 2x 2pole connector

Specifications

Power On Consumption (watts)500 mA

General Specs

Product Weight (lbs.)1
ColorBlack
Color Finish NameBlack

Sennheiser SL DI 4 XLR Danter Preamplifier

Model #: SL DI 4 XLR
157428
Sennheiser

See Price in Cart

At a Glance

Sennheiser SL DI 4 XLR Danter Preamplifier with switchable phantom power and software controlled

Get to know this product.

The SL DI 4 XLR four input Dante preamp is the ideal interface for wireless microphone receivers, and adding mic/line inputs to a Dante system.

The SL DI 4 XLR four input Dante preamp is the ideal interface for wireless microphone receivers, and adding mic/line inputs to a Dante system. The small form factor to the SL DI 4 XLR allows them to be mounted almost anywhere, putting them close to audio sources and minimizing interference-prone analog wiring. The SL DI 4 XLR features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The SL DI 4 XLR has two network connections to allow Dante Daisy Chaining. Dante Daisy Chaining further simplifies system infrastructure wiring by allowing multiple SL DI 4 XLRs to use a single CAT 5 home run connection to a network switch. Power can also be daisy chained. The SL DI 4 XLR is powered by either external +12VDC or any PoE network switch. All adjustable parameters, like mic/ line gain and phantom power, are software controlled.

Features

4 XLR balanced and RF filtered mic/line inputs

Gain is individually adjustable per channel via software

802.3af compliant PoE powered to work with any compliant PoE network switch, or an external +12VDC supply

+48V Phantom power - powers virtually all types of phantom powered microphones typically used in installed AV systems.

Phantom power is switchable per channel via software

ID LED allows easy identification of the SL DI 4 XLR

Dante Daisy Chaining allows multiple SL DI 4 XLRs to be

Connected over a single home-run to the Ethernet switch

What's in the box?

SL DI 4 XLR

Technical Data

Power consumption 500 mA

Phantom powering P 48

Power supply 12 V DC

Powering 12V DC or 802.3af PoE

Communication Dante Interface

Connection Audio In: 4x XLR3F Ethernet / Dante ™: 2x RJ 45 (1x with PoE) PowerLink: 2x 2pole connector

*Warning (for California residents only): Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Every Consumer Products company is required to post the warning no matter if their products pose any harm. Sennheiser products are all RoHs compliant, yet we are by law required to post the Proposition 65 warning message anyway.

Useful Documents
Specifications

General Specs

Product Weight (lbs.)1
ColorBlack
Color Finish NameBlack

Connections

Connector Type:4x XLR3F; 2 x RJ 45; 2x 2pole connector

Specifications

Power On Consumption (watts):500 mA
WarningProposition 65 Warning for California Residents