Northern Home Essentials

406-265-5568

Sennheiser HME 26-II Black Headset

At a Glance

Sennheiser HME 26-II-100 Stage and Monitoring Headset with crystal clear audio transmission and excellent feedback rejection

Proposition 65 Warning for California Residents

The HME 26-II models apply to the requirements of most demanding broadcast applications.

The pre-polarized condenser microphone features brilliant acoustic performance for crystal clear audio transmission in highest broadcast quality and has an excellent feedback rejection.

The closed, supra-aural headphones have a high maximum SPL and are equipped with the ActiveGard©. This limiter can be activated or deactivated.

Features

Lightweight with extra soft cushions and excellent wearing comfort

Headphones with very accurate sound reproduction for professional applications

Microphone for crystal clear audio transmission in highest broadcast quality

ActiveGard© (on/off switch) for protected hearing

High passive noise attenuation

Reliable performance over long lifetime for safe investments

Swiveling ear cap allows single sided listening

Microphone can either be worn on right or left-hand side

Modular concept of boom, cable and cushions for highest flexibility

What's in the box?

1 headset

1 cable clip

1 large headband padding

1 wind and pop screen

1 manual

Technical Data

Impedance: 100 Ohm stereo (headphones); 600 Ohm stereo (headphones)

Characteristic SPL: 1 kHz, 1 mW: 105 dB; 1 kHz, 1 V: 115 dB; 1 kHz, 1 V: 107 dB

Pick-up pattern: Omnidirectional (BKE 4-2); Cardioid (BKE 4-4)

Max. Sound pressure level (active):

ActiveGard™ switched off: 128 dB at 1 kHz, 200 mW

ActiveGard™ switched off: 127 dB at 1 kHz, 200 mW

ActiveGard© activated: 105 dB at 1 kHz, 200mW

Frequency response (Microphone): 40 to 20.000 Hz

Transducer principle (Microphone): Pre-polarized condenser microphone

Frequency response (Headphones): 40 to 18.000 Hz

Contact pressure: 3.9 N

Ear coupling: Supra-aural

Weight: (w/o cable and w/o connector) approx. 205 g

Min. terminating impedance: 4700 O

Storage temperature: -55 °C to 70 °C

Operating temperature: -15 °C to 55°C

Maximum sound pressure level (passiv): 150 dB; 0,5 % THD

Output voltage: 4 mV / Pa +/- 2,5 dB

Operating voltage (stand alone): 5 - 15 V DC

Transducer principle (headphones): Dynamic, closed

*Warning (for California residents only): Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Every Consumer Products company is required to post the warning no matter if their products pose any harm. Sennheiser products are all RoHs compliant, yet we are by law required to post the Proposition 65 warning message anyway.